Popular destinations
Popular destinations
Explore our export-ready high-efficiency electric vehicle systems tailored for commercial fleets, light electric vehicles (LEV), and motorcycle assembly manufacturers in Denmark.
How advanced Field-Oriented Control (FOC) motor controllers solve sub-zero thermal degradation, salt-fog corrosion, and EU regulatory hurdles for Danish OEMs.
Danish winters present harsh conditions with freezing temperatures (-15°C to 5°C) and heavy coastal salt spray. Our OEM controllers utilize automotive-grade silicone thermal potting (IP67/IP69K), sub-zero voltage compensation, and thermal throttling protection to prevent MOSFET breakdown under frost loads.
Transitioning from standard square-wave controllers to 3-phase Sinusoidal Vector Control (FOC) elevates system efficiency to over 98.5%. This reduces motor heat losses by up to 35%, extending real-world battery range across Copenhagen urban commuting routes.
All OEM/ODM production batches exported to Denmark strictly align with EU Type-Approval mandates, including CE mark, EN 15194 electric vehicle standards, ISO 13849 functional safety, EMC EN 61000-6-3 emission criteria, and REACH/RoHS environmental directives.
Inside our factory's custom motor drive architecture engineered for high torque density, regenerative energy recapture, and seamless telematics integration.
Built with automotive-grade ST-Microelectronics & Toshiba power MOSFETs offering sub-milliohm internal resistance. Minimizes internal heat dissipation under maximum current acceleration.
Intelligent software field weakening algorithms increase top-end motorcycle speed by 15% to 25% without exceeding safe battery voltage levels, maximizing motorway cruising capabilities.
Isolated CAN 2.0B / CANopen / J1939 communication interface allows real-time telemetry streaming between motor controller, BMS, anti-theft IoT trackers, and LCD digital dashboards.
Programmable multi-level regenerative braking feeds braking kinetic energy back into the lithium pack while preventing rear-wheel lockups on wet or icy Danish roads.
Our OEM/ODM controller factory develops custom firmware mappings tailored for specific electric vehicle frames and operational environments across Denmark.
Severe stop-and-go delivery cycles in Copenhagen demand immediate torque and thermal durability under heavy loads (250kg+ payload capacity). Our 48V-72V 80A-150A controllers deliver instant low-end throttle response while preventing over-temperature shutdown.
Designed for off-road recreation in Jutland and high-speed highway commuting. Continuous currents up to 300A peak enable speeds exceeding 100km/h for 10kW to 20kW mid-drive Permanent Magnet Synchronous Motors (PMSM).
Plug-and-play controller solutions for urban commuter bikes and retrofit conversion kits. Features auto-identification of motor Hall sensors, self-learning parameter tuning, and anti-glare display screen synchronization.
Compare our standard and high-performance motor controller series designed for OEM motorcycle manufacturers and Danish fleet distributors.
| Controller Series | Nominal Voltage | Peak Phase Current | Control Mode | Communication Protocol | IP Rating | Ideal Application |
|---|---|---|---|---|---|---|
| AICC-EC-4880 | 48V - 60V | 120 A | 3-Phase FOC Sine-Wave | UART / CAN 2.0B | IP67 Sealed | Urban Cargo E-Bikes & Light Scooters |
| AICC-MC-72150 | 60V - 72V | 280 A | FOC + Field Weakening | CANopen / J1939 | IP67 Heavy Extrusion | 3000W - 5000W Fleet E-Motorcycles |
| AICC-HP-96300 | 72V - 96V | 450 A | Vector FOC (Sensored/Sensorless) | Dual-Isolated CAN-Bus | IP69K Waterproof | 10kW+ High-Speed E-Dirt Bikes & Moto |
| AICC-HV-400kW | 300V - 400V | 600 A | Automotive Space Vector FOC | Custom OEM Protocol | Liquid Cooled IP69K | Heavy Commercial & Specialized EVs |
Our state-of-the-art SMT manufacturing lines and rigorous testing protocols deliver absolute operational reliability.
Our factory utilizes high-speed Yamaha and Fuji SMT lines alongside automated 3D SPI (Solder Paste Inspection) and AOI (Automated Optical Inspection) systems. Critical power components undergo dual-component polyurethane potting to isolate sensitive electronics from salt spray, vibrations, and liquid ingress.
Every single controller unit leaving our assembly line is subjected to a 4-hour dynamic load test inside environmental temperature chambers (-20°C to +85°C). We verify phase current balance, thermal throttling thresholds, and over-voltage protection before packaging.
We provide customized OEM GUI diagnostic software, allowing your engineering team in Denmark to adjust throttle curves, regenerative braking profiles, current limits, and speed governors via USB or Bluetooth modules.
With robust component sourcing contracts with global semiconductor suppliers, we guarantee consistent lead times. We offer flexible MOQ arrangements and rapid prototype dispatch (within 7 business days) for OEM evaluation in Denmark.
Clear answers regarding OEM cooperation, custom CAN bus protocols, EU import documentation, and cold weather performance guarantees.
Yes. All our motor controller models designed for the European market comply with CE, EMC EN 61000-6-3 / EN 61000-6-1, EN 15194, and RoHS requirements. We provide comprehensive test reports and Declaration of Conformity (DoC) documentation to support your vehicle homologation with the Danish Transport Authority (Færdselsstyrelsen).
Absolutely. Our dedicated firmware engineers specialize in CANopen, J1939, and custom proprietary CAN communication protocols. Send us your DBC files or frame definitions, and we will flash tailored firmware prior to mass production.
Our controllers feature low-temperature software voltage compensation algorithms that prevent premature battery cut-offs caused by cold-weather voltage sags. Additionally, automotive-grade components ensure smooth startup and zero clock drift down to -30°C.
Standard sample units are dispatched within 3 to 5 working days. Customized controllers requiring bespoke harness wiring, customized voltage cut-offs, or specific CAN protocols are typically shipped via express air freight within 10 to 14 business days.
We provide a standard 24-month factory warranty on all industrial and automotive motor controllers exported to European clients, with direct engineering support, spare parts replacements, and remote diagnostic software support.
Contact our engineering leadership today for custom firmware configuration, technical CAD drawings, and factory-direct OEM/ODM pricing tailored for the Denmark market.