Popular destinations
Popular destinations
Explore our high-performance electric two-wheeler parts catalog, certified for severe tropical environments, heavy-duty commercial payloads, and Jakarta municipal compliance.
Understanding the unique environmental, regulatory, and operational stresses of the Special Capital Region of Jakarta (DKI Jakarta) to engineer resilient electric motorcycle components.
Jakarta’s annual monsoon season exposes two-wheelers to standing floodwaters and ambient humidity exceeding 85%. Components such as the 72V 50Ah LiFePO4 battery pack, mid-drive motor controllers, and circular TFT dashboards must incorporate dual-layer conformal coatings, pressure-equalizing waterproof vents, and IP67/IP68 sealed harness connectors to prevent thermal runaways and short circuits.
Metropolitan Jakarta’s dense traffic grid (Sudirman, Thamrin, Gatot Subroto) demands frequent stop-and-go acceleration under ambient temperatures exceeding 34°C. Our 6000W high-torque BLDC motors and high-phase-current controllers utilize liquid cooling jackets or aerospace-grade aluminum extrusion heat sinks to maintain thermal stability below 80°C under full load.
Ride-hailing (Gojek, Grab) and last-mile delivery riders in Jakarta average 120–180 km daily. Standard consumer components rapidly fail under this strain. Our heavy-duty parts catalog prioritizes 3,000+ cycle LiFePO4 chemistry, reinforced swappable battery casings, and ultra-durable sintered brake pads for minimum total cost of ownership (TCO).
Detailed engineering data for Jakarta assembly plants, local brand manufacturers, and fleet conversion engineers.
| Component Category | Core Technical Benchmark | Protection & Materials | Target Local Application |
|---|---|---|---|
| Lithium Battery Packs | 72V 50Ah / 48V 12A-35Ah LiFePO4 & NMC Cells | IP67 Sealed Casing, Smart CAN-bus BMS, Thermal Cutoff | Swappable Fleet & Long-Range Urban Commuters |
| Electric Powertrains | 350W Hub Motors up to 6000W Mid-Drive BLDC Motors | Aerospace Grade Aluminum Alloy Frame Integration | Lightweight E-Bikes, Urban Scooters, High-Speed Dirt Bikes |
| Smart Displays | 2.8" Capacitive & 5" Circular TFT LCD (1080x1080 MIPI) | 400-800 Nits Sun-Readable, Anti-Glare Glass, IP67 Front Panel | Real-Time Telematics, Speedometer, Battery SOC Visualizer |
| Motor Controllers | Sine-Wave Field-Oriented Control (FOC) / ASI Upgrades | Regenerative Braking Logic, Anodized Heat Sink Enclosure | Smooth Traffic Acceleration, Energy Recovery in Traffic Jams |
The transition from legacy lead-acid batteries to high-energy-density lithium solutions is the single largest catalyst in the Indonesian electric vehicle industry. Our 72V 50Ah LiFePO4 (Lithium Iron Phosphate) pack is designed explicitly for the high ambient temperatures of South East Asia. LiFePO4 provides superior thermal and chemical stability, virtually eliminating the risk of thermal runaway even under mechanical puncture or overcharging. Equipped with intelligent Battery Management Systems (BMS), these packs communicate via CAN 2.0B protocol to transmit real-time state-of-charge (SOC), cell voltage balancing data, and temperature monitoring directly to the motorcycle instrument cluster.
From nimble 350W hub motors tailored for low-speed urban neighborhood travel to aggressive 72V 6000W mid-drive motors for performance dirt bikes, our powertrain assemblies maximize electrical-to-mechanical conversion efficiency (>92%). Complementing these drives are our high-resolution instrument displays. Featuring the 5-Inch Circular TFT LCD Display Module (HX8399C Driver) with 400 nits brightness, riders maintain crisp visibility even under direct sunlight along Jakarta’s open thoroughfares.
How we empower Indonesian importers, assemblers, and government-contracted fleet buyers to seamlessly navigate local regulations and customs.
Indonesia’s Presidential Regulation No. 55/2019 mandates progressive increases in Domestic Component Level (TKDN) for two-wheeled electric vehicles. We work closely with local assembly facilities in Cikarang, Karawang, and Tangerang to supply SKD (Semi-Knocked Down) and CKD (Completely Knocked Down) parts kits. This enables local partners to achieve the required 40%+ TKDN threshold while utilizing our core aerospace-inspired powertrain and display components.
Indonesian National Standards (SNI) require rigorous battery safety and electrical compliance for EV components. All exported battery modules and high-voltage harnesses undergo UN 38.3 vibration, thermal shock, and short-circuit testing prior to shipping. Our manufacturing processes conform to ISO 9001 quality management, ensuring frictionless approval by Indonesian testing agencies (BBSPJIL / BSN).
We manage complete export documentation, including Certificate of Origin (Form E for ASEAN-China FTA tariff discounts), MSDS, UN38.3 transport certificates, and custom HS Code classifications. Ships dispatched directly to Port of Tanjung Priok (Jakarta) benefit from optimized FCL/LCL container loading, anti-corrosive maritime packaging, and fast customs clearance clearance workflows.
Rooted in advanced engineering principles inspired by Southern California’s aerospace industry, our platform redesigns two-wheeled transport from the ground up. By replacing heavy cast iron and crude steel stampings with folded sheet-metal chassis structures, variable position actuators, and modular battery assemblies, we offer unprecedented strength-to-weight ratios.
Whether you are establishing a new electric vehicle assembly line in Jakarta or upgrading an existing commercial delivery fleet, our factory direct export program offers total supply assurance.
Common inquiries from Indonesian distributors, EV conversion workshops, and municipal fleet buyers.
Connect directly with our senior powertrain engineers and export specialists to request complete engineering documentation, sample evaluations, or factory direct wholesale quotes.